Special

Tutorial: Arduino based Jog Controller for the CNCSimulator Pro
At CNCSimulator.com we always claim that CNC should be fun. And we think this project is a really fun one. Hobbyists and students, it is time for some Do...
Fri, 9 Jul, 2021 at 10:58 AM
SimBot: the 3D Printed Arm Robot Project
On this page, you find information and downloads for our Open Source 3D Printed Arm Robot Project called SimBot. You will find links to the STL files ...
Fri, 9 Jul, 2021 at 11:10 AM
CNC UNO
In the machine library, you can find a machine called CNC UNO. The machine is virtualized from the award-winning DIY project one of our employees did. It...
Fri, 9 Jul, 2021 at 11:13 AM
Tutorial: Radius compensation for milling machines
Radius compensation works similarly in most CNC machines, but there are differences in how to use the syntax and when to activate/ deactivate the comp...
Fri, 9 Jul, 2021 at 11:22 AM
Machine with C-axis rotary table
This is an explanation of our 4 axis milling center with a rotary table. The C-axis control the rotation of the table. The direction of motion is def...
Fri, 9 Jul, 2021 at 11:29 AM
The Corner Fillet or Chamfer tool
In the Tools menu, under Helpers, you find the Corner Fillet or Chamfer tool. This tool is made to make it easy for you to calculate chamfers and fillets at...
Fri, 9 Jul, 2021 at 11:32 AM
How to use the Arc Calculator Tool
In the Tools menu, under Helpers, you find the Arc Calculator. This tool is made to make it easy for you to calculate arcs. This is an alternative to drawin...
Fri, 9 Jul, 2021 at 11:34 AM
How to use the Polar Coordinates Calculator Tool
In the Tools menu, under Helpers, you find the Polar Coordinates Calculator. This tool is made to make it easy for you to calculate polar coordinates....
Fri, 9 Jul, 2021 at 11:36 AM
How to both turn and mill the same part
From version 2.0, we have the ability to save lathe workpieces as prefabricated milling workpieces. This makes it possible to simulate moving a workpi...
Fri, 9 Jul, 2021 at 11:37 AM
Using the built-in Helpers
In this tutorial, we are going to use the Polar Coordinates Calculator, the Arc Calculator, and the Corner tool. You find them all under Tools - Helpers in ...
Fri, 9 Jul, 2021 at 11:41 AM